Author Topic: Outboard Transom Bracket  (Read 1068 times)

Rick James

  • Guest
Outboard Transom Bracket
« on: August 14, 2013, 06:52:11 AM »
What length bolts will I need to install an O/B bracket on my Picnic Cat transom?
Or, how thick is the fibreglass at the transom?

Later...
Rick James
« Last Edit: August 14, 2013, 01:14:21 PM by Rick James »

Offline skip1930

  • Commodore
  • ******
  • Posts: 2282
  • Karma: 19
Re: Outboard Transom Bracket
« Reply #1 on: August 14, 2013, 08:17:35 PM »
Figure out where you want the O/B bracket and drill a pilot hole.
Check for depth. Allow for glass/hard point, mount thickness, and washer and nut.
And a tad more for thread starting. If your adding a backing plate allow for this.

skip.
« Last Edit: August 15, 2013, 06:45:56 AM by skip1930 »

Rick James

  • Guest
Re: Outboard Transom Bracket
« Reply #2 on: August 15, 2013, 04:48:27 AM »
Thank you, Skip.
I was planning on getting the fasteners before I started drilling, but your suggestion is golden.
Rick