Author Topic: electric panel toggle  (Read 797 times)

Offline fiddledance

  • Deck Hand
  • ***
  • Posts: 25
  • Karma: 0
electric panel toggle
« on: August 06, 2015, 12:11:05 PM »
Hi all~

Does anyone know where to get a yellow toggle for my CP19 electrical panel?  They don't sell any at the Com-Pac company HQ unfortunately.  Advice on replacing?

Warmly,
Brendan



Offline Wes

  • Commodore
  • ******
  • Posts: 787
  • Karma: 36
Re: electric panel toggle
« Reply #2 on: August 06, 2015, 08:08:02 PM »
Holy cow, the panel on my 19 looks nothing like that. What's your hull number?

Wes
"Bella", 1988 CP 19/3 #453
Washington, North Carolina


Offline fiddledance

  • Deck Hand
  • ***
  • Posts: 25
  • Karma: 0
Re: electric panel toggle
« Reply #4 on: August 07, 2015, 12:10:18 PM »
Holy cow, the panel on my 19 looks nothing like that. What's your hull number?

Wes

Hi Wes,

Hull #159.  1st generation, I believe, though the first owner added a bowsprit and lots of extras.  What's yours?

Bren

Offline Billy

  • Commodore
  • ******
  • Posts: 1034
  • Karma: 22
Re: electric panel toggle
« Reply #5 on: August 07, 2015, 12:26:45 PM »
Mine, Hull 35 used to look like that. Then a toggle broke and I couldn't find a replacement. So I got a whole new panel.
1983 Com-Pac 19 I hull number 35 -no name-

Offline Wes

  • Commodore
  • ******
  • Posts: 787
  • Karma: 36
Re: electric panel toggle
« Reply #6 on: August 07, 2015, 06:55:27 PM »
Mine is #453, from 1988. My panel looks like this - I assumed all 19s were similar. Actually my panel isn't original, though it's very similar. I fabricated a new one so I could add a 5th switch for the masthead anchor light.

"Bella", 1988 CP 19/3 #453
Washington, North Carolina

Offline Mike

  • Tactician
  • *****
  • Posts: 93
  • Karma: 2
Re: electric panel toggle
« Reply #7 on: August 09, 2015, 11:51:05 AM »
Mine is #453, from 1988. My panel looks like this - I assumed all 19s were similar. Actually my panel isn't original, though it's very similar. I fabricated a new one so I could add a 5th switch for the masthead anchor light.



Mine is similar (1985)  suggest a panel replacement, don't think there is much there to resurrect. 

Offline crazycarl

  • Commodore
  • ******
  • Posts: 837
  • Karma: 24
Re: electric panel toggle
« Reply #8 on: August 09, 2015, 12:28:42 PM »
fiddledance,

i too replaced the electrical control panel on my 19.

the original worked fine, i just needed more switches.



if you want the original panel, it's yours for the cost of postage.
pm me your address and i'll send it out this week




CC


Somonauk, IL  where the washing machine was invented and the local museum's most interesting exhibit is a two headed calf!

Man invented the slowest form of transportation - the sailboat - then decided to race them. - Philosopher Unknown

Offline Wayne J

  • Rigger
  • ****
  • Posts: 37
  • Karma: 0
Re: electric panel toggle
« Reply #9 on: February 12, 2017, 05:12:18 PM »
CrazyCarl,
Do you still have the old electric panel for the CP-19?

Cheap Wayne here looking to replace mine.
CP-19/3 Richmond VA

Offline comfortably numb

  • Rigger
  • ****
  • Posts: 30
  • Karma: 1
Re: electric panel toggle
« Reply #10 on: February 24, 2017, 07:50:35 PM »
Brenden! Looks like you are getting help, just wanted to say hello from Alum Creek / C-Bus Ohio! Stop by if in town this summer. Bill