Author Topic: Aluminum Polish for Mast/Boom/Etc.  (Read 7909 times)

Offline MacGyver

  • ASM, WalMart
  • Fleet Admiral
  • Commodore
  • ******
  • Posts: 1379
  • Karma: 21
  • WalMart ASM, 1989 ComPac 19/3
Re: Aluminum Polish for Mast/Boom/Etc.
« Reply #15 on: June 25, 2012, 07:11:13 PM »
One thing I would suggest is maybe wrapping it in vinyl after all parts have been stripped off.
I would use a quality vinyl that has a 12 year life span. And by vinyl I am talking about graphics shops vinyl.
When I had my graphics company we used to buy Oracal vinyl. Top grade, by the roll.
Great stuff, lasted a long time, and no need but to wash the underneath off.

Otherwise, Awlgrip is a product I have seen people use at work, and even seen people use Interlux Brightsides paint.... one guy painted his whole rig yellow.......... wow.......

Anyway, I know this is a old post, but figured I would throw in my 2 cents worth.
I might try that vinyl on my spreaders...... hmmm........ just have to get  a hold of my old suppliers......

Mac
Former Harbor Master/Boat Tech, Certified in West System, Interlux, and Harken products.
Works on ALL aspects of the sailboat, 14 years experience.
"I wanted freedom, open air and adventure. I found it on the sea."
-Alaine Gerbault.

Offline BobK

  • Helmsman
  • *****
  • Posts: 199
  • Karma: 7
Re: Aluminum Polish for Mast/Boom/Etc.
« Reply #16 on: June 25, 2012, 11:25:52 PM »
WD 40 and a scotch brite pad will make the aluminum look like new.

Offline Craig Weis

  • Commodore
  • ******
  • Posts: 2037
  • Karma: 17
Re: Aluminum Polish for Mast/Boom/Etc.
« Reply #17 on: March 10, 2016, 11:09:38 AM »
Hummm, isn't the aluminum anodized?
Don't scratch off this protective coating with a 3M scratch pad.
Mequires #49 for polishing up after a good soap cleaner, or aluminum brightener, then a couple coats of Mother's automotive wax.
a lot of elbow grease.

skip.