remove the old numbers/registration sticker - Done
Clean/polish/install new numbers/reg/wax hull - Done
Inspect/Charge batteries - Done
Inspect standing rigging - Done
Inspect halyards/lines - Done
Inspect/inventory sails and organize them somehow - Inspected/Inventoried, there are only 2, so nothing really to organize.
Figure out how the Bimini works. Right now the frame is on over the mast, and the mast cant come up with it on there, so I'm confident it has to come off to raise the mast. I think it is supposed to fold up against the backstay somehow. - Deferred
until after launch. If I need to I can temporarily keep mast up with lowers and the halyard while I re-thread the backstay through the Bimini Frame
Inventory dock lines, anchor rode, lifejackets, signals etc. - Done
. Flares were expired
Not considered but done: Inspect lighting. Several bulbs out. I have not been able to test lights on the mast, but I've ordered spares and will test before I raise the mast so I can change them on the spot.
Diesel...Westerbeke 12c with heat exchanger and remote water heater.
Got in contact with P/O. Oil/filters/zincs changed last fall. Impeller changed last spring. Inspected it and no visible cracking, I'm going to let it go for now.
Prop - Scotch Pad and prop looks great.
Still to do:
Change fuel filters
Inspect raw water strainer
Identify coolant color and have some on hand. There is no coolant in the overflow tank. Any advice on which coolant to use other than a 50/50 mix?
Defer until launch list is the same.